Want to book by phone? Call us Tel: +86-0574-88112458Email: sanhong@cnsanhong.cn  
Products Categories
Product Categories
Contact Us

Ningbo Yinzhou ShengFa Electrical Manufacture Co.,Ltd. 
Add:Zhejiang Ningbo Yinzhou E-3, Houmiao Industrial Area, Songjiang Middle,Road,Zhonggongmiao,Street
Tel:0574-88112458
Fax:0574-88112234
Mobile:+8613738433376
Email:sanhong@cnsanhong.cn

New Products

Off Road Heavy Duty  electric Winch 6000lbs

google facebook

News

Home > News > Content

Electric Winch Use Procedures

Electric winch, with a reel winding wire rope or chain to lift or traction heavy light lifting equipment, also known as hoist. Winches can be used alone, but also for lifting, road construction and mine lifting and other mechanical components, because of simple operation, winding large, easy to move and widely used. Mainly used in construction, water conservancy projects, forestry, mining, wharf and other materials lift or flat drag.

The winch system includes: main drum assembly, winch frame and shroud assembly, angular transmission box assembly, turntable drive, main roller brake system, main brake cooling cycle system, water brake, water brake water circulation system, winch power Input and output shroud, crane anti-collision device, etc. formed. Drilling machine winch components set in the power winch pry seat, compact structure, installation, easy to disassemble.

Features Use

Winches have the following characteristics: high versatility, compact structure, small size, light weight, from the major, easy to use, is widely used in construction, water conservancy projects, forestry, mining, wharf and other materials lift or flat drag, but also for Modern electronic control automatic operation line of ancillary equipment. There are 0.5 tons to 350 tons, divided into fast and slow two. Which is higher than 20 tons for the large tonnage winch, winches can be used alone, but also as a lifting, road construction and mine lifting and other mechanical components, because of simple operation, winding large, easy to move and widely used. Winch main technical indicators are rated load, support the load, rope speed, capacity and so on.

Winch main purpose: First, as a lifting equipment for mine lift, saddle lifting and suspension (lifting) sinking equipment and facilities, that is, along the wellbore to enhance the ore, waste (gangue) stone, lifting personnel, decentralized materials, tools and equipment And so on; the second is as a transport equipment for the underground scheduling of transport ore (tub), stope rake mine (slag) or filling, remove the column and so on.

Electric winch is widely used in places where heavy work and traction are required. The motor of the single drum electric winch (Fig.) Is driven by the reducer, and the brake is fitted between the motor and the reducer input shaft. In order to meet the needs of lifting, pulling and turning operations, there are winchs with double reel and multi-roll units. General rated load less than 10T winch can be designed as electric winch.

Use procedures

1, the winch must be set according to the specification requirements. Its specifications net height of not less than 2.0 meters net width of 2.4 meters, net depth of 2.0 meters. Along the roadway Lane according to the actual situation of the roadway, in order not to affect the principle of safe operation.

2, the construction of the winch as far as possible the use of picks, according to the different types of roadway support can be used wooden shed or I-beam support. When the roof is in good condition, it is supported by anchor net, and the roof is broken

3, 11.4KW small winch base are to use concrete pouring, the basic specifications for the 1.0 × 1.0 × 1.0 meters. The ratio of cement, sand and gravel (melon seeds) in concrete is 1: 2: 2, and the ratio of water to cement is 0.4.

4, winches with shelves support, to be carried out by the outside of the frame, shed and shed between the use of support wood or tie rod into a whole, waist, help to Yan Yan real. Shed distance of not more than 0.7 meters. With anchor support, the row spacing of the anchor is 800 × 800mm.

5, the winch motor should be installed in the small winch nest on the side, the operating space from less than 0.8 meters; operation buttons on the shelves, the switch placed neatly and shall not interfere with personnel operations.

6, the other in accordance with the relevant provisions of the operating procedures


Home | About Us | Products | News | Exhibition | Contact Us | Feedback | Mobile | XML

Copyright Ningbo Yinzhou Shengfa Electrical Manufacture Co.,Ltd All rights reserved.

Ningbo Yinzhou Shengfa Electrical Manufacture Co.,Ltd